1" CTS End Cap
SKU0650771
Description
WATTS® quick-connect fittings are designed and manufactured for many years of trouble free service. Produced of off white Polysulfone, a high performance thermal plastic material, the WATTS® quick-connect design allows for quick and easy connections without the use of installation tools.- Connection shall be made using WATTS® Series 35 Quick-Connect fitting with Integral Collet and O-ring guide
- Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools
- Fitting must not disassemble to disconnect
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- The polysulfone material used in the quick-connect fittings can be compromised by exposure to volatile organic compounds (VOC's) and caustic chemicals
- Do not expose this product to any such chemical or foreign substance, which would include exposure to the following products like pipe dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation)
- It is also recommended that all threaded connections be made with PTFE tape only
- Therefore, do not expose this product to any such chemical or foreign substance, which would include exposure to the following products, pipe dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation)
- Nominal Size: 1 inFitting/Connector Type: CapEnd Style: PushMaterial: Polysulfone
- Limited
- ASSE 1061
- ASTM F877
- CSA B137.5
- NSF 14/61
- UPC Listed
- Commercial and Residential