Oatey® No-Calk® 11853 Standard Base Roof Flashing
SKU11853
Description
Oatey Galvanized Base No-Calk Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.- Roof flashing slides over DWV pipe for pitch to 40 deg
- Made of rust-proof, stamped 29 ga galvanized steel
- Non-fading sealing collars
- Approved for type "B" installations
- Not for hot-mopped or built-up roofs
- Do not use paint or petroleum based products on rubber collars
- Self sealing collar slides over pipe and requires no caulking
- Metal base for pitch from 0 to 40 deg or up to 10/12 roof
- Rated 180 deg F continuous heat and Approved for type "B" installations
- Pipe Size: 2 inMaterial: SteelType: Standard BaseColor: BlackBase Length: 12-1/2 inBase Width: 9 inFinish: GalvanizedSuitable For Use With: Slides Over DWV Pipe For Pitch to 40 deg
- IAPMO Listed
- NES 653
- PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Commercial and Residential