1/2 in Tomahawk MetalHead Tub/Shower Pressure Connector
SKU632-C263
Description
Sioux Chief preformed elbows are factory-produced to the ASME/ ANSI B16.22 Standard for Copper Sweat Fittings, in the same exact manner as common sweat elbows made by Nibco, Elkhart, and Mueller. Sioux Chief elbows should be considered as the same, regardless of the length of the leg of the Sioux Chief elbows. The bend itself is no different than a common sweat 90. The wall thickness of the back side of the bend is not thinned out, and meets all requirements of ASME/ANSI B16.22. The overall part is burst tested to 2900 psig, which means the bend can and does hold this much pressure.- One-piece, type l performed copper
- MIP and FIP swivel connections mean no more torch at the tub/shower valve
- 1-1/4 in radius bend for decreased turbulent flow and noise
- Elongated tailpiece allows for rigid bracket attachment
- Use Caution when soldering Whenever possible, solder with CPVC socket facing downward
- If CPVC joint is above solder joint, plug temporarily with nipple and cap to prevent chimney effect
- Always apply torch to valve, not to the fitting
- Use a commercial heat blocking agent between solder joint and CPVC joint
- Nominal Size: 1/2 inFitting/Connector Type: Stub OutEnd Style: CPVC Socket x Male C ElbowDomestic/Import: DomesticDimensions: 5/8 in ODMaterial: Copper
- ASTM D2846-93