1/2", 3" Insertion: Universal
SKU121371A/U
Description
Immersion wells, compression fittings and element holders are used with Aquastat® Temperature Controllers to hold the temperature sensing bulb in the controlled medium. Immersion wells and compression fittings also prevent leakage of the controlled medium.- Immersion wells and compression fittings are available to fit a 1/2-14 or 3/4-14 NPT tapping with a range of insulation depths
- Immersion wells and compression fittings are available in a variety of lengths and dia
- Immersion wells and compression fittings are available in a variety of materials, to suit the application
- Materials include - brass, copper, stainless steel, mild steel or monel
- Element holders support the capillary and bulb or an averaging element in duct applications
- Bulb shields protect the sensing bulb from sun and weather with the bulb installed outdoors
- Accessories, including mounting clips, heat conductive compounds, waste nuts, a pipe strap and a well adapter are available for mounting sensing bulbs in various applications
- Immersion wells allow heat transfer while protecting the sensing bulb from contact with the controlled medium
- Immersion wells permit removal of the sensing bulb for testing or replacement without draining the system
- Compression fittings seal the boiler and allow bulb insertion directly into the controlled medium
- 3 in L insertion, 3/8 in shell, 1-1/2 in D insulation and 5/64 in dia capillary
- 1/2-14 NPT well spud
- Material: CopperSuitable For Use With: Aquastat® Temperature Controller
- Limited
- Mounting Clamp