Home

Create a PRO Account for LOWER PRICING & FREE SHIPPING on thousands of Plumbing, HVAC, Hydronics, PEX, Tools, Lighting Products, Parts & Accessories!

Track My OrderCreate PRO Account
Home
Home
Need Help?
Sign In
loading content
Zoeller_53_0001_HR.jpg

3/10 HP Automatic Effluent/Dewatering Submersible Pump

Zoeller
SKU53-0001

Documents

Zoeller_53_0001_Catalog.pdf
Zoeller_53_0001_Manual.pdf
Zoeller_Company_530001_Specification_Sheet.pdf
Zoeller_53_0001_Catalog.pdf
Zoeller_53_0001_Manual.pdf
Zoeller_Company_530001_Specification_Sheet.pdf

Description

The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

$221.25

each
51 In Stock
or for lower prices and free shipping.
  • Corrosion-resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure-tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solid handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge
Horsepower: 3/10
Outlet Size: 1-1/2 in
Series: Mighty-Mate M53
Maximum Head: 19-1/4 ft
Type: Automatic
Cord Type: 3-Wire
Amperage Rating: 9.7
Bearing Type: Sleeve
Dimensions: 10.0625 in H x 10.06 in W in
Flow Rate: 43 gpm
Frequency Rating: 60 Hz
Impeller Type: Non-Clogging Vortex
Material: Cast Iron
Motor Speed: 1550 rpm
Phase: 1
Temperature Rating: 130 deg F
Voltage Rating: 115