32 oz PVC Cement, Fast Setting Heavy Body Low VOC, Gray
SKU31122
Description
Oatey® PVC Fast Set Heavy Duty Gray Cement is recommended for DWV, potable water and irrigation applications. Made to quickly install irrigation pipe and fittings, it builds up to fill gaps in large diameter pipe and loose fitting joints, and is easy to apply with included in-lid dauber. This gray, heavy duty, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings with interference fit up to 18 in. diameter for non-pressure and 12 in. diameter for pressure pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.- Very heavy bodied medium setting gray cement for use on all schedules and classes of PVC pipe and fittings, with interference to 18 in diameter for non-pressure and 12 in diameter for pressure pipes
- Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- Formulated for quick installation of irrigation pipe and fittings
- Builds up for large diameter installation to fill gaps
- Fills gaps in large diameter pipe and loose fitting joints
- 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength
- Minimum 1600 cps at 73 deg F +/- 2 deg F viscosity
- 7.86 +/- 0.2 lbs./gallon density
- 3 to 4 min at 30 to 50 deg F/3 min at 50 to 70 deg F/2 min at 70 to 90 deg F setting
- Suitable For Use With: Upto 18 in Dia PVC Pipe and FittingsType: PVCContainer Size: 946 mLColor: GrayComposition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Methyl Ethyl KetoneCuring Time: 2 hrOdor/Scent: SolventSeries: Fast Setting Heavy Body Low VOCSetting Time: 3 to 4 minTemperature Rating: 40 to 110 deg F
- ASTM D2564
- IAPMO Listed
- NSF 61 for PW
- DWV and Sewer Waste
- For potable water, pressure pipe, conduit and DWV applications