1-1/4 in Dynastick Self-Adhesive Insulation Hanger With Washer 100 pcs
SKU26068
Description
Dynastick® Self Adhesive Insulation Hangers are insulation hangers with a self-stick base. Just peel the release paper from the hanger base and firmly press the base to the duct surface. Impale the insulation over the hanger nail and slip on the locking washer. Self-stick hangers adhere to clean metal surfaces and withstand temperatures of up to 79 deg C.- Min 12 ga zinc chromate pin
- 2 x 2 in 28 ga galvanized steel base
- Polyethylene foam impregnated with rubber based adhesive
- 1 in insulation
- 28 ga steel
- Finish: GalvanizedMaterial: SteelSeries: SAHSize: 1-1/4 inType: Self-Adhesive
- This fastener is bonded to the ductwork with an appropriate adhesive and allowed to set up. After sufficient drying time the liner is impaled on the pin and a washer added to retain the liner.