Mill-Rose 3-Wrap Red Thread Sealing Tape is a PTFE tape designed specifically to seal lines carrying steam, water and other liquids. This is a full or maximum-density tape. Unlike most thread sealing tapes on the market, 3-Wrap tape has not been stretched during the manufacturing process. Stretching lowers the apparent density of tape by increasing its porosity. As stretched tape is more porous, more tape is required to obtain an effective seal.
$3.58
each
10 In Stock
1/4 inshow options
Bulk discount may be available, please contact our support team for details.
or for lower prices and free shipping.
Just 3 wraps for leak-proof joints
Application: use 3-wrap red waterline tape on pipe made from galvanized steel iron, brass, copper, aluminum, stainless steel polyethylene, polypropylene, PVC, CPVC, ABS and fiberglass
3-wrap red waterline tape is available in self-dispensing wall and counter displays, or carded for pegboard display
Pink color pigment
Greater than 100% elongation
In tests conducted by an independent laboratory Mill-Rose 3-wrap red waterline seal tape was found to seal fittings carrying water at pressures up to 4347 psi or 30000kPa when applied as per instructions
-450 to 500 deg F (-268 to 260 deg C) PTFE is completely stable up to 500 deg F or 260 deg C
Decomposition is slow up to 750 deg F or 400 deg C
Decomposition will occur on contact with naked flames
10 to 17 N/mm-sq tensile strength
99% PTFE less than 1%
Specifications
Back to Top
Type:Â 3-Wrap Waterline
Color:Â Red
Width:Â 1/4 in
Length:Â 520 in Roll
Material:Â PTFE
Pressure Rating:Â 4347 psi
Thickness:Â 0.004 in
Application
Back to Top
Use On Pipe Made From Aluminum, ABS, Brass, Copper, CPVC, Fiberglass, Galvanized Steel Iron, Polyethylene, PVC, Stainless Steel